Ue - Soft Font Information Inquiry; Uf - Form Information Inquiry; Ug - Graphics Information Inquiry - Intermec EasyCoder PC4 Programmer's Reference Manual

Chapter 7 — Commands

UE - Soft Font Information Inquiry

Purpose:
Syntax:
Remarks:

UF - Form Information Inquiry

Purpose:
Syntax:
Remarks:

UG - Graphics Information Inquiry

Purpose:
Syntax:
Remarks:
114
Example:
The example below shows a UDC command and a sample
response.
UDC
004
1-972698-02,Cardfirm 02
1-972601-01,Base 4.01
1-972699-01,Bootfirm 01
1-972697-33,Intfont 01
This command makes the printer send information back to the
host on the soft fonts stored in memory.
UE
The printer sends the number of soft fonts and the name, height,
and direction of each soft font through the RS0232 or USB port.
The UE command is executed directly without appending a
Linefeed.
Example:
UE
This command causes the printer to send information about
forms currently stored in the printer back to the host.
UF
The printer sends the number of forms stored and the name of
each form to the host through the RS-232 or USB port.
The UF command is executed directly without appending a
Linefeed.
This command causes the printer to send information about
graphics currently stored in the printer back to the host.
UG
The printer sends the number of forms stored and the name of
each form to the host through the RS-232 or USB port.
ESim for the PC4 and PF8 Printer Programmer's Reference Manual