Unpacking And Installing The Device - Zeiss VISUREF 100 User Manual

WARNING - FIRE HAZARD
The device is not suitable for operation in explosion risk areas
(e.g. combustible mixture of anesthetic, cleaning or disinfecting agents with
air, oxygen or nitrous oxide).
Do not store alcohol and other flammable vapors and liquids in the vicinity
of this equipment.
CAUTION - DANGER FROM FALLING PARTS
When selecting a suitable table, ensure that the combination of table and
instrument is stable up to an angle of tilt of 10°. Furthermore, the table
must be designed for 4 times the weight of the device configuration. If the
table is on castors, these must have a locking device.
CAUTION - PROPERTY DAMAGE
Do not store or use this device in damp rooms. Do not expose the device to
water splashes, dripping water or sprayed water.

Unpacking and installing the device

• Open the box and make sure that all the accessories (Fig. 1) are present.
• Connect the power cable into the socket at the bottom of the body.
• Install the device on a level, steady table which is not susceptible to
vibration.
• Make sure that the power switch is turned off. Then plug the power
cable into an electrical outlet.
WARNING - RISK OF ELECTRIC SHOCK
Be sure to turn off the power switch before connecting to or disconnecting
from a power supply.
Installation
000000-2006-367-GA-GB-151116
21