Auto Power-Off Function; Cooling Fan - Icom IC-2800H Instruction Manual

15
OTHER FUNCTIONS

Auto power-off function

The transceiver can be set to automatically turn OFF after a
specified period in which no operations are performed.
2 hours, 1 hour, 30 min. and OFF can be specified. The spec-
ified period is retained even when the transceiver is turned
OFF by the auto power-off function. To cancel the function,
select "OFF" in step e below.
q Push [
SET] for 2 sec. to enter set mode.
(DISP)
• Push [CHG/L] if [(DISP) SET] is not displayed.
w Push [Y] or [Z] to select the 'Auto Power-Off' item.
• Left-hand tuning dial can also
select the item.
e Rotate the right-hand tuning
dial to select the desired auto
power-off time or turn the
function OFF.
r Push [ï] to exit set mode.
q Push [F SET] to enter set mode.
w Push [F SET] or [G ENT] to select the 'Auto
SET
B
Power-Off' item.
e Push [Y] or [Z] to select the desired auto
power-off time or turn the function OFF.
r Push [E CLR] to exit set mode.
64
SET
Y ï
Operation Beep
ON
Tx T.O.T.
Z
OFF
Auto Repeater
OFF
Auto Power-Off
OFF

Cooling Fan

Auto
Cooling fan
The transceiver has a heatsink and cooling fan to radiate
heat. The cooling fan automatically turns ON while transmit-
ting and remains ON for 2 min. after transmitting. The cool-
ing fan can be activated continuously, if desired.
q Push [
SET] for 2 sec. to enter set mode.
(DISP)
• Push [CHG/L] if [(DISP) SET] is not displayed.
w Push [Y] or [Z] to select the 'Cooling Fan' item.
• Left-hand tuning dial can also
select the item.
e Rotate the right-hand tuning
dial to set the cooling fan to
automatic ("Auto") or contin-
uous ("ON").
r Push [ï] to exit set mode.
q Push [F SET] to enter set mode.
SET w Push [F SET] or [G ENT] to select the 'Cooling
B
Fan' item.
e Push [Y] or [Z] to set the cooling fan to auto-
matic ("Auto") or continuous ("ON").
r Push [E CLR] to exit set mode.
SET
Y ï
Auto Power-Off
OFF
Cooling Fan
Z
Auto
Packet BPS
1200
Squelch Delay
Long
HM-90 Address
1