Lock the operating button
Release operating buttons
6.13
Basic settings
Fig. 55: Basic settings menu
Adjusting the volume of the sounds
V6
Personnel:
1.
Switch to the main menu.
2.
Press and hold down the [input button].
3.
Press and hold down the [Down] arrow button within 4 seconds.
4.
Hold down both buttons for 4 seconds.
Personnel:
1.
Press and hold down the input button.
2.
Press and hold down the [Down] arrow button within 4 seconds.
3.
Hold down both buttons for 4 seconds.
Personnel:
1.
Press the Enter key to open the menu.
2.
Select the menu items Setup Basic setup.
The basic settings are described on the following pages.
The device indicates alarms, warnings and errors both visually and acousti-
cally.
In the menu, you can adjust the volume of the sounds for:
Alarm
n
Warning
n
Error
n
The volume settings are:
loud
n
medium
n
Integral Process Thermostats and High-Temperature Thermostats
Operating personnel
n
In the display the descriptions of the buttons are replaced by
[---].
The entry function is now locked.
Operating personnel
n
In the display the descriptions of the buttons show up again.
The device can be operated again.
Operating personnel
n
99 / 198