Safety; Safety Information - Lauda IN 130 T Operation Manual

1

Safety

1.1

Safety information

V6
IMPORTANT
Before using the device, please read the operating manual carefully.
n
The information in this operating manual must therefore be kept at hand
n
in the immediate vicinity of the device.
Save the operating manual for later reference.
n
This operating manual is part of the device. If the device is passed on, the
n
operating manual must be kept with it.
The operating manual is available on our homepage (https://
n
www.lauda.de).
The "Safe State" of the constant temperature equipment in the event of
overtemperature, low level or failure is defined as:
Heating off.
n
The devices can only be operated as intended under the conditions
n
specified in this operating manual. Any other mode of operation is
considered to be unintended use and could compromise the protection
provided by the device.
You, the user, must check the functionality of the safety fittings of
n
the device. The maintenance intervals must be complied with for this
purpose.
Transport the device carefully. The device must never be tilted or turned
n
upside down.
The device and the inside of the device could be damaged:
n


The device may only be operated by trained personnel.
n
Never put the device into operation if:
n



Do not install the device in areas with aggressive media.
n
The installation surface must be sealed, level, non-slip and non-flam-
n
mable.
Keep the specified distance from other devices, objects or walls.
n
Protect the device from dripping water or condensation.
n
Do not store any liquids or flammable objects above the device.
n
Integral Process Thermostats and High-Temperature Thermostats
An overview of authorized personnel and the protective equip-
ment can be found in Ä Chapter 1.12 "Personnel qualification"
on page 13 and Ä Chapter 1.13 "Personal protective equip-
ment" on page 13.
Refer to Ä Chapter 1.14 "Structure of warnings" on page 14 for
more information on the general structure of warnings.
due to fall,
due to shock.
it is damaged,
it is leaky (for example, heat transfer liquid is escaping),
the mains cable and/or other cables are damaged.
7 / 198