Basic Settings And Branching To Submenus (Master) - Lauda RP 845 Operating Instructions Manual

7.6.1 Basic settings and branching to submenus (Master)

Master; Main level
Bath temperature
1%21
External temperature
1%/1
36
°C
Pump power 1-8/Standby.0
°C
EXT
Control Intern / Extern
2 dots in the display, e.g.
3 dots in the display, e.g.
Proline Low-temperature Thermostats
Setpoint
°C
RDr
°C
Os 7
°C
Bml 0
Further settings
°C
LMDkt
Configure modules
LMnet °C
End
°C
Dlc
LMDkt
, indicate that a submenu follows.
LMnet
, indicate that a module submenu follows.
Starting up
Display flashes. Set setpoint
with or . Display
is accepted after 4 sec. or
proceed immediately
with the key:
⇒ Section 7.7.1
Display flashes. Set value
with or . . Display
is accepted after 4 sec.
or proceeds immediately
with the key:
⇒ Section 7.7.3
⇒ Section 7.7.4
Control parameters,
setpoint resolution,
setpoint-source input,
calibration, etc.
⇒ Section 7.6.2
Protection system,
Command, cooling system,
analog and RS232 digital
module, etc.
⇒ Section 7.6.3
YACE0072 / 21.08.07