Lauda IN 130 T Operation Manual page 100

Fig. 56: Adjusting volume
Set the brightness of the display
Fig. 57: Adjusting brightness
Displayed temperatures in the display
Automatic start after power failure
100 / 198
low
n
off
n
1.
In the Basic setup menu select the menu item  Sounds.

2. Select the sound that you wish to change using the arrow keys.
3. Press the Enter key to confirm your selection.

4. Select a volume setting using the arrow keys.
5. Press the Enter key to confirm your selection.

The display brightness can be set manually.
1.
In the Basic setup menu select the menu item Display  Brightness.

2. The following options are available in the window:
n

In the [Displayed T-ext2] menu you can select via which interface a second
external temperature value is read into your device. The newly selected tem-
perature value is displayed in the home window and in the graphic window.
1.
In the Basic setup menu select the menu item  Display  Displayed
T‑ext2.

2. Select the external temperature with the arrow keys, which you would
also like to be displayed.

3. Press the Enter key to confirm your selection.

After a power failure and restoration of the power supply, the device does
not resume operation (default setting). However, you can set the device to
automatically resume operation after the power is restored.
1.
In the [Basic setup] menu, select the menu item  Autostart.

Integral Process Thermostats and High-Temperature Thermostats
A list containing the sounds opens.
A list containing the volume settings opens.
The new setting is active.
A list containing the settings opens.
You can select the brightness manually with entries [Level 1 - 6].
The brightness intensifies from [Level 1].
The new setting is valid with immediate effect.
A list containing the settings opens.
The measuring channels are displayed which are installed in the
device.
The new setting is active.
A list containing the settings opens.
V6