Lauda IN 130 T Operation Manual page 87

V6
The following information is only relevant for the Integral T device:
Integral Process Thermostats and High-Temperature Thermostats
WARNING!
Malfunctions on the overtemperature protection or low-level
protection are not detected
Burns, scalding, fire
Check the Tmax function and low-level protection on a

regular basis.
WARNING!
Risk of refrigerant circuit bursting from excessive ambient tem-
peratures while device is inoperative
Impacts, cutting, device damage
Observe the permitted storage and operating tempera-

tures.
CAUTION!
Touching hot/cold equipment parts and accessories
Hot and cold burns
Never touch parts that are labeled with the warning symbol

"Hot".
CAUTION!
Automatic device start with the timer
Scalding, cold burns, injury
Before using the timer, ensure that all preparatory meas-

ures for intended use have been implemented!
NOTICE!
Risk of refrigerant escaping from cooling water circuit
Device damage
Before decommissioning the device or if there is a risk

of freezing, drain the cooling water circuit of the cooling
unit using compressed air or an industrial vacuum cleaner
(watertight). Blow compressed air through the circuit.
87 / 198