Lauda IN 130 T Operation Manual page 48

Checking the LAN network
48 / 198
9. Enter the numerical values for byte 2, byte 3 and byte 4.
10. Once you have entered the numerical values, press the left arrow key.

11. Scroll to the numerical values of the [Local mask] menu item and
press the Enter key.

12. Enter the numerical values, as described in points 7 to 9.
13. Once you have entered the numerical values, press the left arrow key.

14. If required, also enter the numerical values for the [Gateway] and
[DNS server].
15. Once you have entered the numerical values, press the left arrow key.

16. Press the [ANW.] softkey to accept the entered numerical values.
17. Press the left cursor key to the move up one menu level and select the
PC control menu item and press Enter.
18. Confirm the [PC control] entry once more.
19. Select the option [On] and confirm the entry.

1.
Start the Windows command processor by entering cmd.exe@ on
the PC with Microsoft Windows operating system.

Integral Process Thermostats and High-Temperature Thermostats
You return to the LAN configuration menu.
The Local mask menu opens.
You return to the LAN configuration menu.
The entered numerical values of [Local IP address], [Local mask],
[Gateway] and [DNS server] are displayed.
The control for the control station is activated.
No settings are accepted if you leave the LAN configuration menu
without first pressing the [ANW.] key.
Set the [DHCP client] from [off] to [on], all numerical values are
reset to 0. 0. 0. 0 .
If you have set up an Ethernet communication between the control
station and the constant temperature equipment, it may take 1 or
2 minutes to establish the connection.
The entry window will open.
V6