Heating Output And Power Supply - Lauda IN 130 T Operation Manual

Table 6
Filling volume
‑ minimum
‑ Maximum
Pump data 50/60 Hz
‑ maximum discharge pressure
‑ Maximum flow rate
Connector thread (outer) inlet/outlet
Noise level 50 Hz Â
Noise level 60 Hz Â
Weight
Distance between device and environment
‑ Front
‑ Back
‑ Right
‑ Left
Class division according to DIN 12 876-1
‑ Class designation
‑ Identification code
15.2

Heating output and power supply

Integral T
Table 1
Heating output
230 V; 50 Hz
200 V; 50/60 Hz
166 / 198
Unit
L
L
bar
l/min
mm
dB(A)
dB(A)
kg
mm
mm
mm
mm
---
---
À - ACC area (Active Cooling Control) according to DIN 12876 is the
working temperature range during operation with an active cooling unit.
Á - Temperature stability determined according to standard DIN 12876-2
 - Noise level determined according to standard EN 11201 for operating
position in front of the device at 1 meter distance
If the maximum current consumption is limited Ä "Limiting the current
consumption" on page 101 the heating output can be reduced.
Depending on the country-specific version, the maximum current con-
sumption may already be limited ex works. Limited current consumption
values are shown in brackets.
Unit
kW
kW
Integral Process Thermostats and High-Temperature Thermostats
IN 2050 PW
11.1
36.3
6.0
120.0
M38 x 1.5
58
58
382.0
200
200
200
200
I
NFL (suitable for
non-flammable liquids)
IN 130 T IN 230 T
2.7 2.7
2.2 2.2
IN 2560 PW
12.1
48.1
6.0
100.0
M38 x 1.5
74
74
647.0
200
200
200
200
I
NFL (suitable for
non-flammable liquids)
IN 230 TW
2.7
2.2
V6