Lauda IN 130 T Operation Manual page 54

ID Function
33 Set temperature T
interruption).
158 Actuating signal of master controller in case of external control
Table 11: Pump
ID Function
6 Outflow pressure / pump pressure, relative to the atmosphere
(only for Integral XT)
12 Through-flow of the pump
(MID flow controller must be connected)
18 Pump power stage
(only for Integral XT)
31 Outflow pressure set point / pump pressure (for pressure control settings)
(only for Integral XT)
37 Through-flow control set point
71 Status of through-flow control: 0 = off / 1 = on
154 Outflow pressure of flow controller, relative to the atmosphere
(MID flow controller must be connected)
156 Pressure limitation set point with active through-flow control
(MID flow controller must be connected)
157 Overpressure turn off point with active through-flow control
(MID flow controller must be connected)
160 Valve position of the flow controller
(MID flow controller must be connected)
164 Pressure measurement value source
Table 12: Fill level
ID Function
9 Heat transfer liquid level (fill level)
54 / 198
in Safe Mode (Safe set point in case of communication
set
Integral Process Thermostats and High-Temperature Thermostats
Unit, resolu- Command
tion
[°C] IN_SP_07
[°C] IN_PV_11
Unit Command
[bar] IN_PV_02
[l/min] IN_PV_07
[–] IN_SP_01
[bar] IN_SP_06
[l/min] IN_SP_09
[–] IN_MODE_05
[bar] IN_PV_09
[bar] IN_SP_10
[bar] IN_SP_11
[%] IN_PV_12
[--] IN_MODE_07
Unit Command
[–] IN_PV_05
V6