Lauda IN 130 T Operation Manual page 19

Fig. 4: Lift device
Table 2: Standard accessories Integral T
Device type
All devices
All devices
IN 130 T, IN 230 T(W)
IN 530 T(W), IN 1030 T,
IN 1330 TW
IN 130 T to IN 530 TW
IN 1030 T to IN 1330 TW
IN 1030 T to IN 1330 TW
All devices
Water-cooled devices
V6
9. Use one permissible (textile) round sling, chain, steel cable or similar
for each ring bolt. Attach the round slings securely to the crossbeam.
10. Align the round slings parallel to one another and at right angles to the
top of the device. The crossbeam È must be parallel with the top of
the device.
11. Use a crane to lift the device off the transport pallet.
Designation
Operating manual
Mains cable
Ring bolt M10 x 17
Ring bolt M10 x 17 (higher load capacity)
Hose fitting for pump connector
Union nut for pump connector
Hose nozzle for pump connector
Hose nozzle with union nut for drain nozzle
Hose fitting for cooling water nozzle
Integral Process Thermostats and High-Temperature Thermostats
An inclined arrangement of the round slings is not permitted.
Use a crossbeam.
Quantity Catalog number
1 Q4DA-E_13-006
1 ---
2 DSS 044
2 DSS 085
2 EOA 004
2 EOV 197
2 HKA 168
1 EOA 078
2 EOA 001
19 / 198