Removing The Stator; Installing The Stator - Husqvarna FS 450 2015 Repair Manual

21 IGNITION SYSTEM
21.4 Removin the stator
21.5

Installing the stator

Condition
The alternator cover has been removed.
-
Remove screw
-
Remove cable support sleeve
Remove screws
-
Take the stator out of the alternator cover.
306639-10
-
Position the stator in the alternator cover.
-
Mount and tighten screws
Guideline
I
Screw, stator
-
Position cable support sleeve
-
Position the cable holder. Mount and tighten screw
Guideline
Screw, cable holder in
306639-11
alternator cover
O
and take off the cable holder.
8
from the alternator case.
8.
O.
I
M4
8
in the alternator case.
M4
I I
4 Nm (3 lbf ft) Loctite ® 648
8.
4 Nm (3 lbf ft) Loctite 243
®
201
™
™