Table of Contents
Advertisement
6
FORK, TRIPLE CLAMP
Disassembling the screw ca with the membrane holder
Info
The steps are identical for both fork legs.
-
Remove the valve with the spring from tap rebound
-
Remove the 0-rings.
200862-10
Preparatory work
-
Disassemble the fork legs.
-
Disassemble the cartridge.
Main work
-
Clamp the screw cap with the membrane holder and the special tool into a vise.
I
Guideline
Use soft jaws.
I
Pin wrench (T103)
•
Info
I
Only tighten the vise lightly.
-
Remove compression holder
-
Remove membrane@. Unclamp the special tool.
-
Remove 0-ring
-
Clamp the open end wrench in a vise. Position compression holder
-
Remove nut
-
Remove spring
-
Remove rebound washer (D.
-
Remove compression piston @. Remove 0-ring
(�
p. 16)
(l!t!I
p. 18)
(�
p. 235)
O.
@).
C,.
0-
@).
O.
@).
22
Advertisement
Table of Contents
