Table of Contents
Advertisement
6
FORK, TRIPLE CLAMP
6.27
Removin the lower tri
6.28
lnstallin the lower triple clamp
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the handlebar cushion.
-
Remove the front wheel.
-
Remove the fork legs.
-
Remove the start number plate.
-
Remove the front fender.
Main work
-
Take off cable holder
-
Remove screw
-
Remove screw
-
Take off the top triple clamp with the handlebar and set it aside.
•
Info
I
Protect the components against damage by covering them.
Do not bend the cables and lines.
-
Remove O-ring
-
Take out the lower triple clamp with the steering stem.
-
Take out the upper steering head bearing.
Main work
-
Clean the bearing and sealing elements, check for damage, and grease.
I
High viscosity grease
-
Insert the lower triple clamp with the steering stem. Mount the upper steering
head bearing.
-
Check whether upper steering head seal
-
Slide on protective ring
800221-10
-
Position the upper triple clamp with the handlebar.
-
Mount screw
-
Secure the wiring harness with cable holder
(!:JI
p. 10)
(!:JI
p. 93)
(!:JI
p. 13)
(�
p. 90)
(�
p. 90)
O
in front of the left radiator.
8.
@).
C,.
Remove protective ring
(!:JI
p. 224)
O
8
@).
and O-ring
C,
but do not tighten yet.
0.
is correctly positioned.
0.
37
Advertisement
Table of Contents
