Husqvarna FS 450 2015 Repair Manual page 201

Table of Contents

Advertisement

20
LUBRICATION SYSTEM
Danger
Danger of poisoning
result in unconsciousness and death.
-
Always make sure there is sufficient ventilation when running the
engine.
-
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
-
Start the engine and let it warm up.
-
Check the engine oil pressure.
Engine oil pressure
Engine oil temperature: 80 °C
(176 °F)
Engine speed: 1,600 rpm
Engine oil temperature: 80 °c
(176 °F)
Engine speed: 6,000 rpm
If the measured value is less than the specification:
-
Check the oil pump for wear. Check all oil channels for free flow.
-
Switch off the engine.
Warning
Danger of burns
machine is driven.
-
Wear appropriate protective clothing and safety gloves. In case of
burns, rinse immediately with lukewarm water.
-
Remove the special tools.
-
Grease the O-ring of the oil filter cover. Mount the oil filter cover.
-
Mount and tighten the screws.
Guideline
I
Screw, oil filter cover
Finishing work
-
Check the engine oil level.
Exhaust gases are toxic and inhaling them may
0.9 bar (13 psi)
2.5 bar (36 psi)
Some vehicle components get very hot when the
(a
p. 195)
199
I 6 Nm (4.4 lbf ft)

Advertisement

Table of Contents
loading

Table of Contents