Table of Contents
Advertisement
12
FUEL TANK, SEAT, TRIM
A
Warning
Danger of poisoning
-
Avoid skin, eye and clothing contact with fuel.
-
Immediately consult a doctor if you swallow fuel.
-
Do not inhale fuel vapors.
-
In case of skin contact, rinse the affected area with plenty of water.
-
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
-
Change your clothing in case of fuel spills on them.
Fuel is poisonous and a health hazard.
Main work
-
Check the throttle cable routing.
-
Position the fuel tank and fit the two spoilers to the sides of the radiator bracket.
-
Make sure that no cables or throttle cables are trapped or damaged.
-
Attach the hose to the fuel tank breather on the tank lid.
-
Mount and tighten screw
I
Guideline
Remaining screws, chassis
-
Mount and tighten screws
Guideline
I
Remaining screws, chassis
-
Plug in connector
-
Remove the wash cap set and thoroughly clean the plug-in connection of the fuel
line using compressed air.
Info
•
I
Under no circumstances should dirt enter into the fuel line. Dirt in the fuel
line clogs the injection valve!
-
Lubricate the O-ring and connect plug-in connection
•
Info
I
Route the cable and fuel line at a safe distance from the exhaust system.
Finishing work
-
Mount the seat.
(!l.,!l
p. 43)
O
with the rubber bushing.
8
with the collar bushings.
8
for the fuel pump.
(!!:!
p. 80)
82
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
C,
for the fuel line.
Advertisement
Table of Contents
