Removing The Engine From The Engine; Assembly Stand - Husqvarna FS 450 2015 Repair Manual

17 ENGINE
17.5.36 Removing the engine from the engine assembly stand
-
Place the long oil screen with the O-rings onto a pin wrench.
-
Push the pin wrench through the opening into the drill hole of the opposite engine
case wall and push the oil screen as far as possible into the engine case.
-
Mount and tighten screw plug
Guideline
I
Screw plug, oil screen
-
Mount and tighten the oil drain plug
Guideline
I
Oil drain plug with magnet
-
Remove the screw connection from the special tool.
I
Engine fixing arm (78029002000)
-
Remove the engine from the engine assembly stand.
Info
Have an assistant help you or use a motorized hoist.
8
with the O-ring.
I
M20x1.5
(D
with the magnet and the new seal ring.
I
M12x1.5
(IOJ p. 233)
187
I
I1 s Nm (11.1 lbf ft)
I I
20 Nm (14.8 lbf ft)