Table of Contents
Advertisement
6
FORK, TRIPLE CLAMP
-o
laiN1·
Info
Hand-tighten only without using a tool.
Connect adapter @ to special tool
Connect adapter@ to the filling port of vacuum pump G).
I
Vacuum pump (T1240S)
(a
Clamp the control lever as shown in the figure.
✓ Control lever
External tank
uum;
and
Oil reservoir
Activate
On/Off
switch (3.
✓ The suction process begins.
✓ Pressure gauge @ drops to the required value.
< 0 bar
@)
✓ Vacuum gauge
drops to the required value.
10 mbar
When the vacuum gauge reaches the required value, turn control lever
0
voir
to Equalize pressure.
Guideline
10 mbar
✓ The pressure gauge increases to the required value.
0 bar
When the pressure gauge reaches the required value, turn control lever
8
Damper
to Pressure.
Guideline
0 bar
✓ Oil is pumped into the cartridge.
✓ The pressure gauge increases to the required value.
3 bar
When the pressure gauge reaches the required value, turn control lever
8
Damper
to Vacuum.
Guideline
3 bar
✓ The pressure gauge drops to the required value.
0 bar
When the pressure gauge reaches the required value, activate the
Guideline
0 bar
✓ The vacuum pump is switched off.
O.
p. 237)
fs)
is set to
Closed; Damper
0
is set to
Vacuum.
35
8
is set to
Vac-
Oil reser
On/Off
switch.
Advertisement
Table of Contents
