Table of Contents
Advertisement
17
ENGINE
-
Position and tighten hose clip �-
-
Connect plug-in connectors �.
-
Connect plug-in connector�-
-
Route the wiring harness without tension and secure it with cable tie
-
Mount EFI control unit @.
G.
-
Mount cable tie(s)
-
Connect negative cable
G
-
Remove filler plug
and add engine oil.
I
Engine oil
11.50 I (1.59 qt.)
-
Mount and tighten filler plug G).
Finishing work
-
Install the main silencer.
-
Install the right side cover.
-
Install the fuel tank. (� p. 81)
-
Mount the seat.
(�
p. 80)
-
Remove the motorcycle from the lift stand.
-
Refill the coolant.
(l!ill
p. 194)
-
Execute the initialization run.
-
Go for a short test ride.
-
Read out the fault memory using the Husqvarna Motorcycles diagnostics tool.
G
of the battery.
I
Engine oil (SAE 1 0W/50)
(a
p. 75)
(�
p. 80)
(l!ill
p. 10)
(�
p. 203)
130
@).
(�
p. 222)
Advertisement
Table of Contents
