Table of Contents
Advertisement
6
FORK, TRIPLE CLAMP
6.6
Installing the fork legs
6.7
-
Release screws @ .Take out the left fork leg.
-
@).
Release screws
Take out the right fork leg.
Main work
-
Position the fork legs.
O
✓ Bleeder screws
•
Info
I
Grooves are milled into the side of the upper end of the fork legs. The sec
ond milled groove (from the top) must be flush with the top edge of the
upper triple clamp.
8.
- Tighten screws
Guideline
I
Screw, top triple clamp
- Tighten screws
@).
Guideline
I
Screw, bottom triple clamp
-
Position the brake line and clamp. Mount and tighten screws
Finishing work
-
Install the front wheel.
(�
O
-
Remove screws
on the left fork leg. Take off the clamp.
-
Remove screws @ on the left fork leg. Take off the left fork protector.
-
@)
Remove screws
on the right fork leg. Take off the right fork protector.
are positioned toward the front.
p. 94)
14
I
1 1 7 Nm (12.5 lbf ft)
1 12 Nm (8.9 lbf ft)
8.
Advertisement
Table of Contents
