Table of Contents
Advertisement
SHOCK ABSORBER, SWINGARM
9
Info
Clamp the damper only lightly.
The filling port must be at the highest point.
The piston rod slides in and out during filling - do not hold it tight with your
hand!
Clamp the control lever as shown in the figure.
fD
✓ The
External tank
control lever is on
0
and
Oil reservoir
on Vacuum.
Operate the
On/Off
switch Q).
✓ The vacuum pump process starts.
✓ Pressure gauge @ drops to the specified value.
< 0 bar
C,
✓ The vacuum gauge
4 mbar
f)
Measure distance
between the floating piston and reservoir hole with the spe
cial tool.
I
Depth micrometer (T107S)
✓ The floating piston is positioned all the way at the bottom.
When the vacuum pressure gauge reaches the specified value, turn the
0
voir
control lever
to Equalize pressure.
Guideline
4 mbar
✓ The pressure gauge increases to the specified value.
0 bar
When the pressure gauge reaches the specified value, turn the
8
lever
to Pressure.
Guideline
0 bar
✓ Oil is pumped into the damper.
✓ The pressure gauge increases to the specified value.
3 bar
When the pressure gauge reaches the specified value, turn the
trol lever to
Vacuum.
Guideline
3 bar
✓ The pressure gauge drops to the specified value.
0 bar
Closed, Damper
falls to the specified value.
(0
p. 235)
65
8
on Vacuum,
Oil reser
control
Damper
8
Damper
con
Advertisement
Table of Contents
