Removing The Stator And Ignition Pulse Generator - Husqvarna FE 350 2015 Repair Manual

22
IGNITION SYSTEM
Stator winding - check for a short circuit to ground (terminal 31)
Measure the resistance between the specified points.
Stator, connector
I
Resistance
If the value displayed does not meet specifications:
-
Change the stator.
Removin the stator and i nition pulse enerator
22.4
EZ
601211-10
- Measuring point
EZ pin 1 Ground
Condition
The alternator cover has been removed.
-
Remove screw
-
Remove the retaining bracket.
305319-10
-
Pull the cable sleeve from the alternator cover.
-
Take off cable retainer plate@.
-
Remove screws
-
Remove the stator and ignition pulse generator from the alternator cover.
305321-10
(-)
O.
8.
208