Rear Wheel; Removing The Rear Wheel - Husqvarna FS 450 2015 Repair Manual

WHEELS
14

Rear wheel

14.7
14.7.1

Removing the rear wheel

(D
-
Press out bearing using a suitable tool.
Info e
•
I
Spacing tube
-
Remove the spacing tube.
0
-
Press out bearing using a suitable tool.
0
-
Press in new bearing
• Info
I
Only press the bearing in via the outer ring otherwise the bearing will be
damaged when it is pressed in.
C,.
-
Position spacing tube
-
Press in the new bearing
• Info
I
Only press the bearing in via the outer ring otherwise the bearing will be
damaged when it is pressed in.
-
Grease new shaft seal rings @ and
Finishing work
-
Install the front wheel. (�
Preparatory work
-
Raise the motorcycle with a lift stand.
can be pushed aside.
all the way using a suitable tool.
(D
all the way using a suitable tool.
O
and press in until they are flush.
p. 94)
(� p. 10)
96