Table of Contents
Advertisement
22 IGNITION SYSTEM
Stator winding - check for a short circuit to ground {terminal 31)
I
Resistance
22.4
264
601211-10
Measure the resistance between the specified points.
Stator, connector
pin
EZ
If the value displayed does not meet specifications:
-
Change the stator.
Removing the stator
Stator winding, measurement II - check the resistance
Measure the resistance between the specified points.
0
Stator, connector
3
Alternator
Resistance of stator
winding at: 20 °c (68 °F)
If the value displayed does not meet specifications:
Change the stator.
EZ
- Measuring point
1
Ground
I
oo Q
Condition
The alternator cover has been removed.
Remove screw
Remove cable support sleeve @ from the alternator case.
Remove screws (D.
-
Take the stator out of the alternator cover.
pin 1 - Stator, connector
EZ
0.368 ... 0.552 Q
I
(-)
and take off the cable holder.
O
pin
EZ
..
..
Advertisement
Table of Contents
