Table of Contents
Advertisement
6
FORK, TRIPLE CLAMP
Disassemblin
Info
The steps are identical for both fork legs.
-
Remove dust boot
-
Remove fork protection ring
•
Info
I
The fork protection ring does not necessarily need to be removed for
repair work.
-
Remove lock ring
•
Info
I
The lock ring has a ground end against which a screwdriver can be posi
tioned.
-
Warm the outer tube in area
I
Guideline
so
c
(122 °F)
0
-
Pull the outer tube forcefully off of the inner tube.
Info
The lower sliding bushing Ci) must be pulled out of its bearing seat.
-
Remove upper sliding bushing
Info
Without using a tool, carefully pull the stack apart by hand.
-
Take off the lower sliding bushing Ci).
-
Take off support ring
-
Take off seal ring �.
-
Take off lock ring
-
Take off dust boot
-
Unclamp the fork leg.
the cartrid e
Preparatory work
-
Disassemble the fork legs.
CD.
0.
@).
(!)
of the lower sliding bushing.
48.
«9.
@).
C,.
(a
p. 16)
18
Advertisement
Table of Contents
