Table of Contents
Advertisement
WHEELS
14
Using a suitable tool, press bearing
Check spacer washer @ for damage and wear.
If the spacer washer is damaged or worn:
Replace the spacer washer.
Position spacer washer @.
CD
Press new bearing
all the way in from the outside to the inside.
•
Info
I
Only press the bearing in via the outer ring otherwise the bearing will be
damaged when it is pressed in.
Clean, grease, and mount spacing tube
I
Long-life grease
(I!\:!
p. 224)
C,
Press new bearing
all the way in from the outside to the inside.
•
Info
I
Only press the bearing in via the outer ring otherwise the bearing will be
damaged when it is pressed in.
Grease new shaft seal ring
Mount lock ring@.
✓ The lock ring engages audibly.
Grease new shaft seal ring
Finishing work
Install the rear wheel.
(!!;!
Remove the motorcycle from the lift stand.
CD
out from the inside to the outside.
0.
8
and press it in until it is flush.
O
and press it in until it is flush.
p. 97)
(!!;!
p. 10)
105
Advertisement
Table of Contents
