Table of Contents
Advertisement
SHOCK ABSORBER, SWINGARM
9
Bleeding and filling the dam�er
Info
Before working with the vacuum pump, be sure to read the operating instructions carefully.
Completely open the adjusters of the rebound and compression damping.
Alternative 1
-
Turn adjusting screw
ble click.
-
Turn counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Compression damping, low-speed
Comfort
Standard
Sport
-
Turn adjusting screw
-
Turn counterclockwise by the number of turns corresponding to the shock
absorber type.
Guideline
Compression damping, high-speed
Comfort
Standard
Sport
-
Turn adjusting screw � clockwise up to the last perceptible click.
-
Turn counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Rebound damping
Comfort
Standard
Sport
Alternative 2
Warning
Danger of accident
seriously alter the handling characteristic.
Extreme modifications to the suspension setting may cause a serious
deterioration in the handling characteristic and overload components.
-
Only make adjustments within the recommended range.
-
Ride slowly to start with after making adjustments to get the feel of
the new handling characteristic.
-
Turn adjusting screws
assembly.
-
Remove the screw of the filling port.
O
-
Install adapter
on the damper.
Info
•
I
Tighten only hand-tight, without the use of tools.
O
-
Connect the adapter
I
Vacuum pump (T1240S)
-
Clamp the damper with soft jaws or hold it as shown in the figure.
CD
clockwise with a screwdriver up to the last percepti
21 clicks
18 clicks
15 clicks
0
all the way clockwise with a socket wrench.
2 turns
1.5 turns
1 turn
14 clicks
12 clicks
10 clicks
Modifications to the suspension setting may
CD, 0
and� to the position determined during dis
to connector @ of the vacuum pump.
(�
p. 237)
64
Advertisement
Table of Contents
