17
ENGINE
17 .3.28
Removing the primary gear
17 .3.29
Removing the freewheel gear
17 .3.30
Removing the left engine case section
O
-
Insert special tool
in the crankshaft.
I
Protection cap (75029090000)
8.
Install special tool
I
Extractor (75029021000)
-
Hold it using the special tool and pull off the primary gear by turning the screw in.
-
Remove the special tools.
O.
-
Remove woodruff key
-
Take off freewheel gear
O.
-
Remove screws
8
-
Mount special tool
with suitable screws.
I
Case separating tool (90129048100)
•
Info
I
Use the drill hole with marking 781.
-
Tilt the left section of the engine case upward and remove the fitting of the engine
fixing arm.
-
Pull off the section of the engine case.
Info
•
I
Do not tension the section of the engine case.
-
Remove the special tool.
-
Take off the left section of the engine case.
8.
-
Remove spacer
(a
p. 232)
(ll!:!l
p. 231)
8.
(a
p. 235)
142