Table of Contents
Advertisement
17
ENGINE
-
Change the gear wheel pair.
0
-
Check sliding gear
for smooth operation in the profile of main shaft @}.
If the sliding gear does not move freely:
-
Change the sliding gear or the main shaft.
0
-
Check shift collar
for damage and wear.
If there is damage or wear:
-
Change the shift collar.
0
-
Check sliding gear
and shift collar
If the sliding gear or shift collar is stiff:
-
Change the sliding gear, shift collar, or countershaft.
-
Check stop disks @ for damage and wear.
If there is damage or wear:
-
Change the stop disks.
C,
-
Use new lock rings
with every repair.
-
Check distance sleeves Gi) for damage and wear.
If there is damage or wear:
-
Change the distance sleeves.
17.4.41
Assembling the main shaft
Info
•
I
Use new lock rings with every repair.
Preparatory work
-
Carefully grease all parts before assembling.
-
Check the transmission.
Main work
-
Secure the main shaft with the toothed end facing downward in the vise.
Guideline
Use soft jaws
0,
-
Mount needle bearing
-
Mount stop disk (D and lock ring
-
Mount 3rd/4th-gear sliding gear
(D
-
Mount distance sleeve
0
for smooth operation in the profile of countershaft (D.
(a
p. 167)
attach 5th-gear idler gear@} with the shift dogs facing upward.
C,.
0
with the small gear wheel facing downward.
@.
and needle bearing
306611-10
168
Advertisement
Table of Contents
