Assembling The Fork Legs - Husqvarna FC 250 2018 Repair Manual

6.19
Assemblin the fork le s
-
Position fluid barrier
✓ The cut-out faces upward.
-
Mount lock ring Ci).
-
Mount and tighten valve core
-
Fill the cartridge with air .
Guideline
Minimum air pressure
Maximum air pressure
-
Adjust air pressure with special tool
Guideline
I
Air pressure
I
Fork airpump (79412966000)
-
Mount protection cap �.
Info
Only mount the protection cap by hand.
Preparatory work
-
Check the fork legs.
Left fork leg
-
Clamp the inside fork tube using the axle clamp.
Guideline
-8
I Use soft jaws.
-
Mount the special tool.
8
>
I Protecting sleeve (T1401)
_
-
Grease and push on dust boot
202103-10
I Lubricant (T14034)
✓ The sealing lip is mounted with the spring expander
facing down.
Info
Always change the dust boot, seal ring, lock ring,
and support ring.
-
Push on lock ring
-
Grease and push on seal ring
I Lubricant (T14034)
(ra!l
(ra!l
(ra!l
FORK, TRIPLE CLAMP 6
@).
4D .
7 bar (102 psi)
15 bar (218 psi)
48
as per specifications.
110.6 bar (154 psi)
p. 313)
p. 28)
(ra!l p. 317)
O .
(ra!l p. 300)
8 .
8.
p. 300)
33
...