9 SHOCK ABSORBER, LINK FORK
9.11
62
S02028-10
Checking the shock absorber linkage
Guideline
Remaining screws,
chassis
-
Position the angle lever and linkage lever.
-
Mount and tighten fitting C).
Guideline
Nut, linkage lever to
angle lever
•
Info
I
Pay attention to flat area
-
Mount and tighten screw
Guideline
M10
shock absorber
Info
Raise the wheel slightly to be able to mount the screw
more easily.
-
Position the frame protectors on the left and right.
-
Mount and tighten screws
Guideline
Screw, frame pro
tector
-
Mount and tighten screws
Guideline
Screw, frame pro
tector
-
Mount the new cable ties.
Finishing work
-
Check the free travel of the foot brake lever.
-
Remove the motorcycle from the lift stand.
Preparatory work
-
Raise the motorcycle with a lift stand.
Main work
O.
-
Remove screw
8.
-
Remove fitting
Info
Raise the wheel slightly to be able to remove the
screws more easily.
M6
10 Nm (7.4 lbf ft)
M14x1 .5
80 Nm (59 lbf ft)
G).
@.
60 Nm (44.3 lbf ft)
®
Loctite
@).
M5
3 Nm (2.2 lbf ft)
@)
with the washers.
M5
3 Nm (2.2 lbf ft)
(ri!ll
p. 156)
(ri!ll
p. 12)
(0
p. 12)
TM
2701