Ignition System; Ignition Coil - Checking The Secondary Winding; Connector; Alternator - Checking The Stator Winding - Husqvarna FC 250 2018 Repair Manual

21

IGNITION SYSTEM

21.1
21.2
2
21.3
266
Ignition coil - checking the seconda
601750-10
601170-10

Alternator - checking the stator winding

1
�6.3mm
P00023-10
winding
Condition
The ignition coil is disconnected.
Spark plug connector cylinder 1 has been removed.
Ignition coil cylinder 1 - check the secondary winding
resistance
Measure the resistance between the specified points.
0
Ignition coil pin 2 (-) - Ignition coil pin 3
Ignition coil
Secondary winding
resistance at: 20 °C
(68 °F)
If the displayed value does not correspond to specifica­
tions:
- Change the ignition coil.

connector

Condition
Spark plug connector cylinder 1 has been removed.
Measure the resistance between the specified points.
0
Measuring point 1 - Measuring point 2
Spark plug connector
1
Resistance at: 20 °C
(68 °F)
If the specification is not reached:
- Change the spark plug connector.
Condition
The alternator has been disconnected.
Stator winding - check the resistance
Measure the resistance between the specified points.
CR
0
Alternator, connector
tor
CR
Alternator
Resistance of stator
winding at: 20 °C (68 °F)
If the displayed value does not equal the setpoint value:
- Replace the stator.
11.075 ... 15.525 kn
3.75 ... 6.25 kn
1
pin - Alternator, connec­
CR 1
pin
1
1.19 ... 1.61 n
1
..