Brake Lever; Foot Brake Lever - Husqvarna FC 250 2018 Repair Manual

Table of Contents

Advertisement

16 BRAKE SYSTEM
Warning
brake.
-
Warning
brake.
-
156
Checkin the free travel of foot brake lever
Danger of accidents
The brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear
Set the free travel on the foot brake lever in accordance with the specification.
402026-10
Ad"ustin the basic osition of the foot brake lever
Danger of accidents
The brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear
Set the free travel on the foot brake lever in accordance with the specification.
-
Operate the foot brake lever repeatedly until the brake
linings are in contact with the brake disc and there is a
pressure point.
-
Add brake fluid to level fj .
I
Brake fluid DOT 4
-
Mount and tighten screw cap
the shim.
Info
Clean up overflowed or spilled brake fluid immedi­
ately with water.
-
Mount new cable ties on the frame protector.
l
-
Disconnect spring
-
Move the foot brake lever back and forth between the end
stop and the contact to the foot brake cylinder piston and
check free travel fj .
Guideline
Free travel at foot brake
lever
If the free travel does not meet specifications:
-
Adjust the basic position of the foot brake lever.
(0
p. 156)
-
Reconnect spring
I
DOT 5.1
(8
p. 298)
O
with membrane
O.
3 ... 5 mm (0.12 ... 0.2 in)
O.
8
and

Advertisement

Table of Contents
loading

This manual is also suitable for:

F2101r1

Table of Contents