Table of Contents
Advertisement
-
Check clutch throw-out
If there is damage or wear:
-
Change the clutch push rod.
-
Check axial bearing � for damage and wear.
If there is damage or wear:
-
Change the axial bearing.
-
Place the clutch push rod
If there is run-out:
-
Change the clutch push rod.
-
Check the length of clutch springs Ci).
I Clutch spring - length
If the clutch spring length is shorter than specified:
-
Change all clutch springs.
-
Check the contact surface of clutch pressure cap
If there is damage or wear:
-
Change the clutch pressure cap.
48
-
Check clutch basket
If there is damage or wear:
-
Change the clutch basket.
-
Check needle bearing 41) and collar sleeve
If there is damage or wear:
-
Change the needle bearing and collar sleeve.
-
Check intermediate clutch discs
If the intermediate clutch discs are not level and are pitted:
-
Change all intermediate clutch discs.
-
Check clutch facing discs G!) for discoloration and scoring.
If there is discoloration or scoring:
-
Change all clutch facing discs.
-
Check the thickness of clutch facing discs G!).
0
for damage and wear.
(D
on a flat surface and check for run-out.
8
for damage and wear.
4D
for damage and wear.
48
and G'i) for damage and wear.
R00004-01
I �
38.5 mm(� 1.516 in)
for damage and wear.
CLUTCH
18
251
Advertisement
Table of Contents
