Disassembling The Main Shaft - Husqvarna FC 250 2018 Repair Manual

17.4.36

Disassembling the main shaft

-
Remove second-gear fixed gear
-
Remove fifth-gear idler gear
0.
-
Remove stop disk
-
Remove lock ring (3.
-
Remove third-gear sliding gear@.
-
Remove lock ring (3.
-
Remove stop disk@).
-
Remove fourth-gear idler gear 41).
-
Secure the main shaft in the vise with the gear teeth facing
downward.
I Guideline
-G)
Use soft jaws.
-
Mount a suitable screw
✓ The screw is supported on the transmission shaft and
not on the sleeve.
Pull off sleeve
I
Puller (46129021000)
8.
e.
CD
and needle bearing
f)
in the main shaft.
O
using special tool G).
(8 p. 304)
D05797-10
ENGINE 17
...
221