Husqvarna FC 250 2018 Repair Manual page 204

17 ENGINE
202
-
Press the crank pin out of the lower crankweb.
-
Press in new crank pin
6)
✓ Oil hole
X If the oil holes are not correctly aligned, the conrod bear­
ing will not be supplied with oil.
-
Blow compressed air through the oil channel to check that it
is clear.
310359-10
-
Mount new connecting rod
Info
Thoroughly oil bearing
310360-10
-
Position special tool
Crankshaft pressing tool (75029047000)
Insert for crankshaft pressing tool (79029008000)
(a p. 311)
-
Insert the crankweb with the connecting rod and bearing.
Position the second crankweb.
-
Position special tool @ with the heel pointing down.
Insert for crankshaft pressing tool (79029008000)
310424-10
(a p. 311)
@)
all the way.
is aligned with oil hole@).
8.
@).
(D
on the press.
(a p. 309)