Husqvarna FC 250 2018 Repair Manual page 78

9 SHOCK ABSORBER, LINK FORK
76
Mount seal ring retainer
0.
Mount lock ring
• Info
I
Do not scratch the inside surface.
Pull out the piston rod until the seal ring retainer is flush with
the lock ring.
(D
Mount locking cap of the damper cartridge.
Bleed and fill the damper.
Fill the damper with nitrogen.
Alternative 1
Turn adjusting screw @ clockwise with a screwdriver as
far as the last perceptible click.
Turn counterclockwise by the number of clicks corre­
sponding to the shock absorber type.
Guideline
Lowspeed compression damping
Comfort
Standard
Sport
Turn adjusting screw
socket wrench.
Turn counterclockwise by the number of turns corre­
sponding to the shock absorber type.
Guideline
Highspeed compression damping
Comfort
Standard
Sport
Turn adjusting screw
tible click.
Turn counterclockwise by the number of clicks corre­
sponding to the shock absorber type.
Guideline
Rebound damping
Comfort
Standard
Sport
C,
and slide it under the ring groove.
(8 p. 77)
(8 p. 80)
17 clicks
15 clicks
13 clicks
fD
all the way clockwise with a
2.5 turns
2 turns
1.5 turns
@)
clockwise up to the last percep­
17 clicks
15 clicks
13 clicks