Water Pump Cover, Installing - Husqvarna FC 250 2018 Repair Manual

17.5.18

water pump cover, installing

-
Mount two-part water pump impeller
-
Mount and tighten the nut
Guideline
Nut, water M6
pump impeller
-
Mount gasket (D.
-
Mount the water pump cover.
Info
Ensure that the dowel pins are seated properly.
8
-
Mount screw with the seal ring b ut to not tighten yet.
Guideline
Screw, water pump
cover
0
-
Mount screw b ut do not tighten yet.
Guideline
Screw, water pump
cover
-
Mount and tighten screws 0).
Guideline
Screw, water pump
cover
8
-
Tighten screws and
Guideline
Screw, water pump
cover
O.
8.
6 Nm (4.4 lbf ft)
Loctite
M6x25 10 Nm (7.4 lbfft)
M6x25 10 Nm (7.4 lbfft)
M6x40 10 Nm (7.4 lbfft)
0.
M6x25 10 Nm (7.4 lbfft)
ENGINE 17
®
243
™
..
235