Installing The Starter Motor; Installing The Valve Cover - Husqvarna FC 250 2018 Repair Manual

17 ENGINE
17.5.27
17.5.28
242

Installing the starter motor

Installing the valve cover

-
Grease the 0-ring. Position the starter motor.
I Long-life grease (8 p. 300)
-
Mount and tighten screws
Guideline
I I
Screw, starter motor
-
Thoroughly oil the bearing pin of the torque limiter.
-
Position torque limiter@.
8.
-
Position gasket
Info
Ensure that the dowel pins are seated properly.
Position the alternator cover.
-
Mount and tighten screws
Guideline
Screw, alternator
cover
-
Grease the 0-rings and mount spark plug wrench insert
O.
M6 110 Nm (7.4 lbf ft)
8.
M6 10 Nm (7.4 lbf ft)
...
O.