Husqvarna FC 250 2018 Repair Manual page 175

Position the shift lever.
Mount and tighten screw Ci) with washers.
Guideline
M6
Screw, shift
lever
Slide on the engine sprocket with the collar facing the engine.
4D
Mount screw with the washer but do not tighten yet.
Guideline
Screw, engine M10
sprocket
Mount the chain.
Connect the chain with connecting link �.
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
Actuate the foot brake lever.
4D.
Tighten screw
Guideline
Screw, engine M10
sprocket
Info
The help of an assistant is useful in this step.
Position clutch slave cylinder with the new gasket.
Mount and tighten screws G).
Guideline
M6
Screw, clutch slave
cylinder
ENGINE 17
14 Nm (10.3 lbf ft)
®
Loctite 243
™
60 Nm (44.3 lbf ft)
®
Loctite 2701
TM
60 Nm (44.3 lbf ft)
®
Loctite 2701 ™
10 Nm (7.4 lbf ft)
173