Setting The Characteristic Map Of The Throttle Response - Husqvarna FC 250 2018 Repair Manual

7 HANDLEBAR,CONTROLS
50
Settin g the characteristic map of the throttle response
Info
On the throttle grip, the characteristic map of the throttle response is changed by changing the guide
plate.
A guide plate with a different characteristic map is supplied.
���--
�
- e
Finishing work
-
Check throttle cable play.
-
Install the fuel tank.
-
Mount the seat.
-
Install the air filter box cover.
-
Install the right side cover.
Main work
-
Push back sleeve
-
Remove screws
-
Detach the throttle cables and take off the grip tube.
-
Remove guide plate
@)
-
Position the required guide plate on the grip tube.
Guideline
0
The label OUTSIDE
positioned at marking
I
Alternative 1
Grey guide plate (79002014000)
Alternative 2 I
Black guide plate (79002014100)
• Info
I
The gray guide plate opens the throttle valve more
slowly.
The black guide plate opens the throttle valve more
quickly.
The black guide plate is already mounted when the
vehicle is delivered.
(0 p. 48)
(0 p. 102)
(0 p. 1 00)
(0 p. 95)
(0 p. 99)
O.
8
(D .
and half-shells
0.
C,
from handle tube
must be visible. Marking
G).
..
f)
must be