Table of Contents
Advertisement
Installing the 12 V batterY
H00388-10
Char in the 12 V battery
Warning
12 V batteries contain harmful substances.
Risk of injury
-
Keep 12 V batteries out of the reach of children.
-
Keep sparks and open flames away from 12 V batteries.
-
Only charge 12 V batteries in well-ventilated rooms.
-
Maintain a minimum clearance from inflammable materials when charging 12 V batteries.
Minimum clearance
-
Do not charge deeply discharged 12 V batteries if the charge is already below the minimum voltage.
Minimum voltage before the start of the charge
-
Dispose of 12 V batteries with less than the minimum voltage correctly.
WIRING HARNESS, BATTERY 15
Main work
-
Position the 12 V battery in the battery compartment with
the terminals facing forward, and secure with holding
O.
bracket
112 V battery (HJTZ5S-FP)
-
Mount and tighten screw
Guideline
Info
6)
Contact disks
and cable sockets
tery terminal.
0
-
Connect positive cable
Guideline
Screw, battery termi-
nal
-
Slide positive terminal cover
-
Connect negative cable@ to the 12 V battery.
Guideline
Screw, battery termi-
nal
-
Slide negative terminal cover
Finishing work
-
Mount the seat.
(a
p. 100)
-
Install the air filter box cover.
1 m (3 ft)
9 V
(a
p. 282)
8.
M6
10 Nm (7.4 lbf ft)
must be mounted under screws
8
with the claws toward the bat
to the 12 V battery.
M5
2.5 Nm (1 .84 lbf ft)
Cs)
over the positive terminal.
M5
2.5 Nm (1 .84 lbf ft)
fD
over the negative terminal.
(a
p. 95)
@)
...
137
Advertisement
Table of Contents
