Table of Contents
Advertisement
17.4.27
Checking the freewheel
17.4.28
freewheel, removing
Mount valve keys 6).
Info
When mounting the valve keys, check that they are
seated correctly; preferably, fix the valve keys to the
valve with a little grease.
Position cam levers
were removed.
Mount the cam lever shafts.
Remove screw
Mount and tighten screw plugs
Guideline
Screw plug, cam
lever axis
Place the shims in the valve spring retainers corresponding to
their installation position.
310440-10
Insert freewheel gear
freewheel gear clockwise; do not wedge.
Check the locking action of the starter idler gear
The freewheel gear cannot be turned clockwise and does
not block counterclockwise:
-
Change the freewheel.
302804-10
Remove lock ring
310363-10
C,
in the positions they had before they
0.
(D
with the O-rings.
M10x1
10 Nm (7.4 lbf ft)
O
into the freewheel hub, turning the
O.
ENGINE 17
..
O.
..
213
Advertisement
Table of Contents
