Checking The Lubrication System; Removing The Crankshaft Bearing Inner Race - Husqvarna FC 250 2018 Repair Manual

17 ENGINE
17.4.5
-
Check the internal rotor and external rotor of oil pumps
-
Check oil pump shaft @} for damage and wear.
-
Check the oil pump cover for damage and wear.
17.4.6
200

Checking the lubrication system

✓
If there is damage or wear:
-
Change the oil pumps.
If there is damage or wear:
-
Change the oil pump shaft.
If there is damage or wear:
-
Change the oil pump cover.

Removing the crankshaft bearing inner race

310373-10
00
0
O
for damage and wear.
-
Fix the crankshaft in the vise.
Guideline
I Use soft jaws.
-
Warm up special tool
Guideline
1150 °c (302 °F)
I Puller (58429037037)
-
Push the warmed up special tool
bearing inner race, press firmly together, and pull jointly from
the crankshaft.
-
Take off the compensating disk.
-
Repeat these steps on the opposite side.
310340-10
O.
(!al p. 305)
O
onto the crankshaft
..
..