Installing The Shock Absorber - Husqvarna FC 250 2018 Repair Manual

9.10

Installing the shock absorber

SHOCK ABSORBER, LINK FORK 9
Main work
-
Carefully position the shock absorber into the vehicle from
the bottom.
-
Mount and tighten screw
Guideline
Screw, top M10
shock absorber
-
Position link fork and mount fork pivot.
Info
Pay attention to flat area 6).
-
Mount and tighten nut fj.
Guideline
I
Nut, fork pivot I M16x1 .5
-
Mount the chain.
-
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
(Option: Brembo)
-
Position the foot brake cylinder.
C,
✓ Push rod engages in the foot brake cylinder.
Info
Ensure that the dust boot is correctly seated.
-
Mount and tighten screws
Guideline
Remaining screws,
chassis
(Option: MAGURA)
-
Position the foot brake cylinder.
C,
✓ Push rod engages in the foot brake cylinder.
Info
Ensure that the dust boot is correctly seated.
-
Mount and tighten screws
O.
60 Nm (44.3 lbf ft)
®
Loctite 2701
100 Nm (73.8 lbf ft)
@).
0.
M6 10 Nm (7.4 lbf ft)
0.
™
61