Husqvarna FC 250 2018 Repair Manual page 179

Remove the locking piece and position the subframe.
Info
Watch out for the intake flange.
Mount and tighten screw fl!).
Guideline
MB
Screw, sub­
frame
Remove screw Ci).
Mount and tighten screw Ci).
Guideline
MB
Screw, sub­
frame
Repeat the operation on the opposite side.
Mount rollover sensor Ci).
Plug in the connector.
G.
Mount protection cap
Position and tighten hose clip
ENGINE 17
30 Nm (22.1 lbf ft)
®
Loctite 2701
TM
30 Nm (22.1 lbf ft)
Loctite ® 2701
TM
G.
177