Table of Contents
Advertisement
7 HANDLEBAR,CONTROLS
7.5
7 .6
48
Checking throttle cable routing
Checkin throttle cable play
Preparatory work
-
Remove the right side cover.
-
Remove the air filter box cover.
-
Remove the seat.
(0
p. 99)
-
Remove the fuel tank.
(0
Main work
-
Check throttle cable routing.
Both throttle cables must be routed, side by side, on the
back of the handlebars and above the fuel tank bracket,
to the throttle valve body. Both throttle cables must be
secured behind the rubber strap of the fuel tank support.
If the throttle cable routing is not as specified:
-
Correct the throttle cable routing.
Finishing work
-
Install the fuel tank.
(0
p. 102)
-
Mount the seat.
(0
p. 1 00)
-
Install the air filter box cover.
-
Install the right side cover.
-
Check the throttle grip for smooth operation.
-
Move the handlebar to the straight-ahead position. Turn the
throttle grip back and forth slightly and determine the play in
throttle cable f).
I Throttle cable play
If the throttle cable play does not meet specifications:
-
Adjust throttle cable play.
-
Push the cold start button in all the way.
When the throttle grip is turned forward, the cold start but
ton returns to its original position.
If the cold start button does not return to its original posi
tion:
-
Adjust throttle cable play.
p. 99)
(a
(0
p. 95)
p. 101)
(a
p. 95)
(a
p. 99)
I 3 ... 5 mm (0.12 ... 0.2 in)
(a
p. 49)
(a
p. 49)
..
Advertisement
Table of Contents
