Alarm Card, Line Card, And Rout Processor Overview; Alarm Cards - Cisco 12416 Installation And Configuration Manual
Cisco systems bridge/router installation and configuration guide
Hide thumbs
Also See for Cisco 12416:
- Replacement instructions manual (32 pages) ,
- Unpacking instructions manual (28 pages) ,
- Instructions manual (16 pages)
Table of Contents
Advertisement
Chapter 1
Product Overview
Alarm Card, Line Card, and Rout Processor Overview
Note
Alarm Cards
OL-11495-01
This section provides general information about alarm cards, line cards and types
of route processors installed in the router.
The Cisco 12000 series router supports online insertion and removal (OIR),
allowing you to remove and replace a card while the router remains powered on.
The router is equipped with 2 alarm cards:
One alarm card occupies the dedicated far left slot of the upper card cage.
•
•
The other alarm card occupies the dedicated far right slot of the lower card
cage.
The alarm card slots differ from the rest of the card cage slots in that it is labeled
as an "alarm" card slot, is physically narrower than the other slots, and has a
different backplane connector.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
Alarm Card, Line Card, and Rout Processor Overview
1-21
Advertisement
Table of Contents
Troubleshooting
