Dir Command; Delete Command - Cisco 12416 Installation And Configuration Manual

Using RP Flash Memory Cards

dir Command

delete Command

Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
4-50
To list the directory contents of the flash memory in use, enter the
dir [device-name] command.
Where device-name can be slot0:, slot1:, or bootflash:.
The following example shows the contents of the flash memory card in slot 0.
Milo# dir slot0
Directory of slot0:/
1 -rw- 122015
2 -rw- 2054979
3 -rw- 6670560
4 -rw- 5560
20578304 bytes total (9661756 bytes free)
Milo#
To delete a file from flash memory, use the cd command to select the flash
memory device and then enter the delete filename command.
Where filename is any file within the selected flash memory media.
•
The following example shows how to delete the file named fun1 from the current
flash memory card directory in slot 0.
Milo# cd slot0:
Milo# delete slot0:fun1
Milo# dir
Directory of slot0:/
1 -rw- 122015
2 -rw- 2054979
3 -rw- 6670560
20578304 bytes total (9661756 bytes free)
Milo#
Files that are deleted from the current flash memory directory are removed from
the directory list but are not erased (they still occupy space in memory). This
allows you to recover a deleted file at a later time using the undelete command.
To permanently remove deleted files use the squeeze command.
Chapter 4 System Startup and Basic Configuration
Sep 30 1999 15:03:55 myfile1
Sep 30 1999 15:17:33 gsr-diag-mz.RELEASE28
Sep 30 1999 15:22:49 gsr-p-mz.p7
Oct 08 1999 16:54:53 fun1
Sep 30 1999 15:03:55 myfile1
Sep 30 1999 15:17:33 gsr-diag-mz.RELEASE28
Sep 30 1999 15:22:49 gsr-p-mz.p7
OL-11495-01